Studiomaster Direct101MX Compact Vertical PA System Fashion

DIRECT 101MX

1x Vertical array
1x 10″ Active subwoofer with mixer
SYSTEM POWER – 2000w
MAX SPL – 126dB
FREQ RESPONSE – 38Hz-20kHz
SYSTEM DIMENSIONS (W H D) – 357 2075 437mm
SYSTEM WEIGHT (NET) – 30.5kg

Designed for DJs, small bands, presentations, education and houses of worship, the DIRECT MX series is an all in one column array PA solution with a powerful 2000W built-in amplifier, comprehensive 4 channel mixing, Bluetooth 5.0 playback (with TWS) and reverb effects on the input channels.

Capable of reproducing very low-end frequencies and clear, musical highs through the custom designed wood enclosures, that securely connect together with a unique internal connection, so you can have your PA set-up and ready to go in seconds.

All Direct models have 6 x 3″ mid range transducers combined with a 1″ compression driver to deliver clear highs and clarity of your vocals or instruments.

The DirectMX comes installed with a 4-channel dsp mixer, including 2 x switchable MIC LINE inputs with gain and reverb controls, 1 x HI-Z instrument input, 1 x RCA Bluetooth stereo input and an XLR line output. There is also an Independent SUB LEVEL control for quick bass adjustment. A Powerful 24-bit DSP interface with display allows for the adjustment of 3 operation modes: music, dj, speech. 3 band EQ with sweepable mid frequency and storable presets, digital gain control, high-pass filtering, dual-channel limiter, Digital delay for delay zones up to 100 m (in steps of 0.25 m) and Bluetooth connection, all controlled via a simple ONE CONTROL encoder. The DirectMX utilises Bluetooth 5.0 large range stereo Bluetooth playback with TWS (true wireless stereo).

No matter your application the DIRECT MX series gives you the connection options you need. The on-board 4 channel mixer comes with 2x MIC Line inputs with a useful vocal reverb facility, a Hi-Z instrument input for connecting electric guitars and a stereo input for playback either through the phono connections or via Bluetooth 5.0. The DSP allows simple set-up with 3 preset systems: Music, DJ or Speech, along with 3 band master EQ and a useful output delay if using as a delay speaker in a larger system.

vertical array speaker

MF – 6 x 3″ mid-range speaker
HF – 1 x 1″ compression driver
Coverage (HxV) – 120° x 30° advanced coverage
Rated Power – 180 W (RMS)
Rated Impedance – 6 Ohms
Dimensions(WxHxD) – 117x807x124.3mm (each section)
Net Weight (kg) – 8kg (total both sections)

DIRECT 101MX SUBWOOFER:
Speaker type – 1 x 10″ transducer
Rated Power – 250W (RMS)
Rated Impedance – 4Ω
Dimensions(WxHxD) – 357 x 612 x 437 mm
Net Weight (kg) – 22.5kg

DIRECT 101MX AMPLIFIER:
Rated power – 2 x 300W RMS
Frequency range – 20Hz – 20kHz
DSP conncection – 24 bit (1in-2out)

dsp mixer with reverb

Inputs – 4 Channels: 2x Mic Line, 1x Hi-Z, 1x RCA Bluetooth)
Input connectors – XLR 6.35mm jack combo, 6.35mm jack unbal, 1x RCA jack
Impedance – MIC LINE: 10k Ohms, HI-Z: 470k Ohms, RCA: 10k Ohms
Output connector Mix output: XLR (PRE DSP)
Controls – DSP adjust, Sub Level, Channel Gain, MIC LINE Reverb.
DSP – 24-bit dip with display.
DSP functions – Mode, EQ, Gain, HPF, Limit, Delay, Bluetooth.
Connectivity – Bluetooth 5.0.